Through the recent return visits to customers, we found that although there are instructions, there are still some people who know little about aluminum silicate fiber modules. They ignored some issues that should be paid attention to and did not give full play to the performance of the aluminum silicate fiber module. Today, the editor will discuss the aluminum silicate fiber module with you again, hoping to help you.
1. After the aluminum silicate aluminum silicate fiber module is installed, cut off the packaging tape. Due to fiber expansion, the width direction can be tightly packed together. The length direction is to better compensate the gap caused by fiber shrinkage after heating. The aluminum silicate fiber felt should be unfolded to the same thickness as the module, and packed between two rows of modules along the length of the module to achieve a better sealing effect.
2. After completing the installation of the aluminum silicate aluminum silicate fiber module, cut off the packaging tape, pull out the splint, and gently tap the surface of the module to smooth it.
3. In order to better extend the service life of the module and improve the wind and corrosion resistance of the aluminum silicate fiber, a high-temperature curing agent should be sprayed on the surface of the fiber after the module is installed.
