Through the investigation, it is found that many customers are very good at using aluminum silicate ceramic fiber blanket, but once there are problems, they are at a loss and don’t know what to do. It’s like a good driver doesn’t necessarily know how to repair a car. When looking for a repairman to repair it, he found that the problem was very simple. In many cases, he could solve it himself. There was no need to find a professional to repair it. The customer was both time-consuming and laborious. According to this situation, Xiaobian decided to summarize the solutions to some problems we often encounter, and then share them with you to solve problems for customers. Today we will introduce the construction rules of aluminum silicate ceramic fiber blanket and the solution to this problem. Please read the following article.
Aluminum silicate fiber blanket is widely used in sound insulation, heat preservation and fire prevention of light wall. It plays a vital role in today’s days. Is there anything to pay attention to during equipment construction?
1. When laying the aluminum silicate fiber blanket, the veneer shall face the indoor side and be perpendicular to the purlin. An additional 20 cm roll of felt shall be reserved at one eaves and fixed on the outermost purlin with a special fixture or double-sided tape.
2. During unwinding, ensure alignment and tension, lay the aluminum silicate ceramic fiber blanket to the other eaves, leave an additional 20cm roll blanket, and fix it on the outermost purlin with special fixture or double-sided tape.
3. The two rolls of cotton are connected together by stapling on the veneer flash.
4. The color steel plate of the equipment roof, remove the special fixture at the eaves, and use the reserved 20cm veneer to close the edge of glass wool.
5. Pay attention to the tension and alignment of aluminum silicate fiber blanket and the tight joints between rolls. When the longitudinal lap is required, the lap joint shall be installed at the row purlin.
6. According to the engineering requirements, in order to avoid the attack of cold insulation bridge, we can think about putting some hard insulation materials on purlins.
For more details or questions, please call the company’s hotline + 0531 85800088 or through the online customer service website, or leave your contact information. We have technicians to solve the problems related to high temperature materials for you at any time.
Shandong redon high temperature materials Co., Ltd. has domestic high-end production equipment and reliable production technology, with an annual output of 1050 ceramic fiber series products, 1260 ceramic fiber series products, 1400 ceramic fiber series products and 1600 polycrystalline series products of more than 10000 tons. There are more than 30 kinds of products in different forms, such as cotton, blanket, felt, board, paper, various textiles, profiled products, modules, folding blocks, castables, spraying and so on, which can meet the heat insulation requirements of different situations in the high temperature field. Welcome to click the online service at the bottom right of the website or submit an online inquiry. We will contact you as soon as possible.