After years of use and tempering in high-temperature kilns and equipment, aluminum silicate ceramic fiber products have become an indispensable material for thermal insulation and sealing in high-temperature kilns and high-temperature equipment. Its performance is much better than other traditional thermal insulation materials. It has the following characteristics.
1. Small bulk density
The unit weight is generally between 100 ~ 330kg / m3, which is only equivalent to 1 / 5 ~ 1 / 3 of light refractory brick.
2. Good thermal stability
Because aluminum silicate fiber is elastic and long, it will not produce structural stress even if the temperature changes sharply, and its product is a porous material with intertwined fibers, and the expansion of monomer fibers can be absorbed by the product itself. Therefore, with appropriate construction technology, sufficient strength and quench resistance can be obtained.
3. Good chemical stability
Except strong alkali, hydrofluoric acid and phosphoric acid, it is hardly eroded by other chemicals. Aluminum silicate fiber has excellent chemical stability in oxidizing and neutral atmosphere. The chemical stability to reducing atmosphere, alkali metal oxides and sulfides is relatively poor, and crystallization is easy to occur, which degrades the properties of the fiber. The chemical stability of aluminum silicate fiber mainly depends on its chemical composition and impurity content. The chemical stability of pure Al2O3 Fiber is the best, while SiO2 has little effect on the chemical stability when it fluctuates in the range of 50% ~ 60%.
4. Good high temperature resistance
According to the variety of raw materials, aluminum silicate fiber can be divided into three types according to the maximum service temperature: low temperature type (below 1000 ℃), standard type (below 1200 ℃) and high temperature type (1200 ~ 1400 ℃), which is much higher than the maximum service temperature (500 ~ 700 ℃) of fibrous thermal insulation materials such as rock wool and glass wool.
5. Low thermal conductivity
Aluminum silicate fiber has very small thermal conductivity in high temperature area and has excellent thermal insulation effect. At 1000 ℃, its thermal conductivity is only 15% of that of refractory clay brick and about 38% of that of light clay brick, but its thermal conductivity is closely related to temperature, bulk density, slag ball content and fiber diameter. The thermal conductivity of aluminum silicate fiber decreases with the increase of bulk density, but the decreasing range gradually decreases. Even when the bulk density exceeds a certain range, the thermal conductivity no longer decreases and tends to increase.
For more details or questions, please call the company’s hotline + 0531 85800088 or through the online customer service website, or leave your contact information. We have technicians to solve the problems related to high temperature materials for you at any time.
Shandong redon high temperature materials Co., Ltd. has domestic high-end production equipment and reliable production technology, with an annual output of 1050 ceramic fiber series products, 1260 ceramic fiber series products, 1400 ceramic fiber series products and 1600 polycrystalline series products of more than 10000 tons. There are more than 30 kinds of products in different forms, such as cotton, blanket, felt, board, paper, various textiles, profiled products, modules, folding blocks, castables, spraying and so on, which can meet the heat insulation requirements of different situations in the high temperature field. Welcome to click the online service at the bottom right of the website or submit an online inquiry. We will contact you as soon as possible.
